Mineral Composite Laboratory

Jesmonite Calculator: Free AC100 Ratio Tool [2026]

Calculate exact AC100 and AC300 liquid and powder mixing ratios, waste allowances, and material batch costs with our free jesmonite calculator.




1. Blend & Mold Measurement Mode



2. Batch Scaling & Waste Buffer




Calculated Batch Slurry

AC100 COMPOSITE

Total Slurry Mix Needed
294.0 g
10.37 oz | 1.75x specific gravity with 5% waste buffer
Mineral Base Powder (Weigh Gradually)
210.0 g
7.41 oz (2.5 parts reactive mineral base)
Acrylic Liquid (Weigh First into Cup)
84.0 g
2.96 oz (1.0 part pure acrylic polymer)
Maximum Pigment Allowance (2% Cap)
5.9 g
Never exceed 2% pigment to avoid weakening cured matrix
Estimated Cast Material Cost: $6.47 ($22.00/kg rate)

Direct Answer: Jesmonite AC100, AC300 & AC730 Mixing Ratios

Jesmonite AC100 and AC300 mix strictly by weight at a 2.5:1 ratio (2.5 parts Base Powder to 1 part Liquid Acrylic — e.g., 250g powder + 100g liquid = 350g total pour). To calculate directly from mold water volume (mL/g), multiply water capacity by 1.85 to get total AC100 mix weight. For exterior concrete-finish Jesmonite AC730, use a 5:1 ratio (5 parts base to 1 part liquid). Keep liquid pigments under 2% maximum of total mix weight.

How to Use the Jesmonite Calculator for Silicone Molds

Casting bespoke architectural trays, terrazzo coasters, and planters demands absolute mathematical precision.

Our intuitive jesmonite calculator calculates exact liquid and powder quantities so you never underfill molds mid-pour.

Jesmonite represents an advanced water-based mineral composite pairing pure acrylic polymer liquid with reactive gypsum powder.

Follow these practical steps to calculate batch weights with our tool:

  1. Tare Your Scale: Place your clean, dry silicone mold onto a digital gram scale and press tare to zero.
  2. Measure Water Volume: Fill the mold cavity flush with room-temperature water. Record the total weight in grams.
  3. Enter Measured Volume: Input water grams into the jesmonite calculator to establish exact mold cubic capacity.
  4. Select Waste Cushion: Choose a 5% to 10% waste buffer to compensate for wall cling inside mixing beakers.
  5. Read Batch Weights: Weigh out the calculated acrylic liquid first, then gradually incorporate base powder while blending.

Our composite casting tool eliminates guesswork when preparing multi-cavity silicone mold pours.

Studio artisans regularly depend on a jesmonite calculator to batch identical terrazzo coaster sets efficiently.

Core Mathematical Formulas Powering the Jesmonite Calculator

Jesmonite AC100 relies on an exact stoichiometric ratio between acrylic polymers and mineral base powder.

According to technical specifications published by the official Jesmonite manufacturer, AC100 requires an uncompromised 2.5:1 weight ratio.

Formula Part 1: Total Slurry equals Mold Water Volume multiplied by 1.75 Density Factor, multiplied by Waste Allowance.

Formula Part 2: Acrylic Liquid Weight equals Total Slurry divided by 3.5 total ratio parts.

Formula Part 3: Base Powder Weight equals Acrylic Liquid Weight multiplied by 2.5 parts.

Formula Part 4: Maximum Safe Pigment equals Total Slurry multiplied by 0.02 (strict 2% threshold).

Dividing total batch weight by 3.5 isolates the exact single liquid portion.

Multiplying that liquid amount by 2.5 provides the matching base powder weight required for structural cross-linking.

Formulating terrazzo batches is effortless when using a mobile casting calculator in your studio.

Before mixing delicate pastel pigments, check your ratios inside this jesmonite calculator to avoid crumbly castings.

The 1.75 Specific Gravity Density Multiplier Explained

Why do you have to multiply mold water weight by 1.75 in composite calculations?

Water has a specific density of 1.0 gram per milliliter.

Mixed Jesmonite slurry is a dense mineral composite containing heavy gypsum and acrylic polymers.

One milliliter of wet mixed Jesmonite AC100 weighs approximately 1.75 grams.

If you pour 100 grams of mixed slurry into a mold holding 100 grams of water, your piece will underfill by 43%.

According to composite material guidelines from ASTM International, specific gravity directly dictates casting fill volume.

Applying the 1.75 multiplier ensures your poured slurry fills silicone cavities flush to the rim every single time.

Home decor studios use an accurate mixing tool to eliminate costly material under-fills during production runs.

Whenever you test new silicone mold shapes, run the displacement weight through our jesmonite calculator first.

Standard Mold Volume Reference Table for AC100 Castings

When batch casting popular craft silhouettes, match your measured water volumes against calibrated outputs from our jesmonite calculator:

Cast Item Description Water Test (ml) Acrylic Liquid (g) Base Powder (g) Total Slurry (5% Buffer)
Round Terrazzo Coaster (10cm) 80 ml 42.0 g 105.0 g 147.0 g
Oval Vanity Trinket Tray (18cm) 160 ml 84.0 g 210.0 g 294.0 g
Scallop Shell Jewelry Dish 120 ml 63.0 g 157.5 g 220.5 g
Square Hexagon Coaster 95 ml 49.9 g 124.7 g 174.6 g
Ribbed Arch Planter Pot 240 ml 126.0 g 315.0 g 441.0 g
Fluted Tea Light Candle Holder 65 ml 34.1 g 85.3 g 119.4 g

Checking standard mold weights in our jesmonite calculator prevents running out of wet slurry mid-pour.

Craft workshops rely on this ratio formulation tool to allocate bulk material orders accurately.

7 Critical Casting Conditions and Technical Studio Rules

Achieving silky smooth, chip-resistant castings requires adhering to seven fundamental technical rules:

  1. Strict Weight Measurement: Never measure by volume scoops because trapped air pockets produce weak, chalky casts.
  2. The 1.75 Multiplier: Always multiply mold water volume by 1.75 to ensure full cavity fill.
  3. Order of Addition: Always pour acrylic liquid into your mixing container first, then gradually sift powder while whisking.
  4. High-Shear Mixing: Blend slurry with a mini high-shear blade attached to a cordless drill for 2 full minutes.
  5. Pot Life Awareness: Working time is 12 to 15 minutes at 68 degrees Fahrenheit, but drops rapidly in hot workshops.
  6. Exothermic Heat Peak: Demold pieces between 20 and 30 minutes once the chemical heat peak cools completely.
  7. Terrazzo Chip Displacement: Pre-made terrazzo chips displace slurry volume, so reduce liquid and powder outputs proportionally.

Following verified procedures inside our composite workshop tool guarantees durable, commercial-grade architectural castings.

You can easily toggle between grams and ounces in this jesmonite calculator for complete formulation freedom.

Jesmonite Pigment Loading Limits and the 2% Maximum Rule

Jesmonite liquid pigments are formulated to disperse instantly in water-based acrylic polymers.

However, adding excess pigment destroys the cross-linked crystalline matrix.

Strict Limit: Never exceed 2% pigment by weight relative to total batch slurry.

For example, a 300-gram batch requires no more than 6.0 grams of liquid pigment.

Soft Pastels (0.2% to 0.5%): Yields delicate blush pink, mint green, and pale lavender with maximum tensile hardness.

Medium Tones (0.5% to 1.5%): Produces rich terracotta, warm mustard, and sage green with excellent demold resilience.

Deep Charcoal (1.5% to 2.0%): Achieves intense dark tones at the maximum safe pigment threshold.

Above 2.0% Warning: Over-pigmenting prevents proper chemical hydration, producing chalky items that crack easily.

Never substitute solvent alcohol inks or oil pigments into the jesmonite calculator because solvents disrupt acrylic bonding.

With instant ratio breakdowns, this digital formulation tool calculates both maximum pigment caps and component weights.

Real-World Case Studies Tested in the Jesmonite Calculator

Examine two practical workshop batch examples calculated with our jesmonite calculator:

Case Study 1: Production Run of 4 Hexagon Coasters (320 ml Total Water Volume).

Four coaster molds holding 80 ml each require 560 grams of raw slurry.

With a 5% cup residue buffer, total batch weight equals exactly 588.0 grams.

The jesmonite calculator allocates 168.0 grams of Acrylic Liquid and 420.0 grams of Base Powder.

Case Study 2: Architectural Fluted Oval Vanity Tray (160 ml Water Volume).

A single tray requiring 160 ml of water yields 280 grams of net slurry.

Adding a 5% waste buffer brings the batch to 294.0 grams total.

Our tool confirms dividing the mix into 84.0 grams of liquid and 210.0 grams of powder prevents cup shortage.

Smart studio workflows start by entering multi-piece batch counts into our batch estimation tool.

Avoid expensive resin wastage by validating every custom pour in this jesmonite calculator.

Demolding Timelines, Acrylic Sealing, and Waterproofing

Proper curing and sealing protocols protect cured pieces from liquid stains:

  1. Wait for Cool-Down: Jesmonite heats up to 104 degrees Fahrenheit during curing. Demold only after pieces cool completely.
  2. Air Dry for 24 Hours: Although solid after 30 minutes, casts retain moisture and must evaporate on wire racks for 24 hours.
  3. Wet-Sand Terrazzo: Wet-sand pieces under trickling water using 120 to 400 grit sandpaper to reveal vibrant composite chips.
  4. Apply Penetrating Sealer: Jesmonite is naturally porous like limestone and absorbs oils unless sealed with food-safe acrylic sealers.
  5. Beeswax Buffing: Apply a thin coat of natural beeswax paste for a silky satin finish on decorative vanity trays.

Keep your workshop running smoothly by organizing casting workflows with our digital studio assistant.

From one-off prototype dishes to high-volume market collections, this jesmonite calculator delivers dependable results.

Cross-Category Artisan Tools: Silicone Molds, Concrete, Resin, and Soap

Coordinating modern craft collections requires balancing multiple molding and casting mediums simultaneously.

Pouring custom silicone molds for bespoke terrazzo shapes? Calculate silicone rubber volumes with our silicone mold calculator.

Creating matching industrial desk accessories in solid cast stone? Estimate mortar and gravel with our concrete calculator.

Casting clear decorative floral paperweights to accompany your Jesmonite homeware? Calculate resin parts using our resin mixing ratio calculator.

Formulating botanical cold process soaps to display in your handcrafted composite dishes? Price finished bars with our soap pricing calculator.

For an in-depth breakdown of AC100 powder ratios, read our detailed guide on how to calculate jesmonite ratios.

Calculate base powder and acrylic liquid simultaneously using this composite estimator before opening your mixing containers.

Reliable composite casting begins by measuring digital gram weights in your jesmonite calculator.

Frequently Asked Questions (FAQ)

Why do I have to multiply water volume by 1.75 in the Jesmonite calculator?

Water has a specific density of 1.0 g/ml, whereas mixed Jesmonite AC100 slurry has a density of 1.75 g/ml.

Can I alter the 2.5:1 ratio to make Jesmonite thinner?

No. Adding excess liquid weakens the mineral matrix, causing soft chalky casts that break easily.

How do I prevent pinhole air bubbles on the surface of casts?

Mix with a high-shear blade on a drill and tap silicone mold sidewalls firmly after pouring.

How much pigment can I safely add to Jesmonite AC100?

Never exceed 2% pigment by weight of total slurry to prevent disrupting acrylic crystal bonding.

What is the difference between Jesmonite AC100 and epoxy resin?

Jesmonite is a non-toxic water-based mineral composite curing in 30 minutes, whereas epoxy resin is a petroleum plastic.

Can I use food coloring or alcohol inks in Jesmonite?

No. Alcohol inks and food dyes contain chemical solvents that disrupt acrylic polymer cross-linking.

Is cured Jesmonite waterproof and food safe?

Unsealed Jesmonite is water-resistant but porous. It requires food-safe acrylic sealers for fruit bowls and decorative food contact.

How long does Jesmonite take to cure before demolding?

Jesmonite cures in 20 to 30 minutes once its exothermic heat peak cools back to room temperature.

Master Studio Casting Quality Assurance Protocol

Achieving durable, chip-resistant architectural casts requires strict 2.5:1 digital scale weighing and high-shear mechanical blending.

Entering exact mold water measurements into our jesmonite calculator guarantees full cavity fill and eliminates unexpected batch shortages.

Professional home decor studios formulate superior terrazzo collections when standardizing pours with verified mineral ratios.


Our free jesmonite calculator helps craft artisans, terrazzo artists, and home decor studios calculate exact 2.5:1 AC100 base powder and acrylic liquid ratios in grams, mold volume water tests, and pigment additions. Formulating high-performance composite castings requires weighing materials on digital scales according to official Jesmonite manufacturer user guides. Use this jesmonite calculator alongside our free craft tools to pour bubble-free coasters, trays, and planters.

Jesmonite calculator for AC100 mixing ratios and mold volume in grams
Measuring AC100 liquid and base powder ratios on a digital scale using our Jesmonite calculator.

How to Use the Jesmonite Calculator for Silicone Molds

Using our jesmonite calculator takes less than one minute and prevents running short of slurry mid-pour. Follow these four workshop steps:

  1. Conduct the Digital Water Test: Place your empty silicone mold on a digital scale and press tare to zero. Fill the mold with room-temperature water to the exact rim line. The weight of water in grams equals the mold volume in milliliters (ml) for the jesmonite calculator.
  2. Dry the Mold Thoroughly: Pour out the test water and dry your silicone mold with a microfiber towel before casting, as residual water drops create surface pitting defects.
  3. Input Water Weight in the Jesmonite Calculator: Enter your measured mold volume in milliliters (ml) or grams of water. Select your waste allowance percentage (recommended 5% to 8%).
  4. Review Exact Gram Allocations: The jesmonite calculator instantly displays the exact grams of Jesmonite AC100 Acrylic Liquid and Reactive Mineral Base Powder required to cast your piece.

Core Mathematical Formulas Powering the Jesmonite Calculator

Jesmonite AC100 relies on an exact stoichiometric chemical reaction between its water-based pure acrylic liquid and reactive mineral gypsum powder. Our jesmonite calculator executes the following equations:

1. The 1.75 Specific Gravity Density Multiplier

Specific Gravity: 1 ml of mixed wet Jesmonite slurry weighs ~1.75 grams
Total Slurry Needed (g): Total Mix = Mold Water Volume (ml) × 1.75
With 5% Waste Cushion: Total Batch (g) = Total Slurry × 1.05

2. The 2.5:1 Weight Ratio Decomposition Formula

Total Ratio Parts: 1 Part Liquid + 2.5 Parts Powder = 3.5 Total Parts
Jesmonite Liquid (g): Total Batch Weight (g) / 3.5
Jesmonite Base Powder (g): Jesmonite Liquid (g) × 2.5
Proof Check: Liquid (g) + Base Powder (g) = Total Batch Weight (g)

3. Pigment Concentration Limits

Maximum Safe Pigment (g): Total Batch Weight (g) × 0.02 (2% max)
Note: Adding more than 2% liquid pigment destabilizes the cured acrylic matrix inside the jesmonite calculator.

7 Critical Jesmonite Casting Conditions & Mixing Dynamics

Unlike epoxy resin, which cures through slow exothermic polymerization over 24 hours, Jesmonite behaves like fine liquid porcelain with strict technical requirements modeled in our jesmonite calculator:

Condition # Casting Condition Chemical / Physical Dynamics & Impact
Condition 1 Strict 2.5:1 Weight Ratio (Never Volume) Jesmonite AC100 components have vastly different bulk densities. Measuring with volume cups results in a severe powder deficit, producing weak, chalky casts prone to snapping. Our jesmonite calculator strictly computes gram weight for digital scale measurement.
Condition 2 The 1.75 Density Factor Conversion Water has a specific density of 1.0 g/ml. Because Jesmonite contains dense mineral base components, 100 ml of mold space requires 175 grams of mixed slurry. Without this 1.75 multiplier in your jesmonite calculator, molds will underfill by 43%.
Condition 3 Mixing Beaker Wall Residue Loss (5% - 8%) Jesmonite slurry has high wet viscosity and clings to silicone spatulas and mixing beaker walls. If you mix the exact mold volume, 5% to 8% remains stuck inside the cup. Our jesmonite calculator integrates a waste buffer to guarantee a full mold rim.
Condition 4 Working Pot Life Window (12 - 15 Minutes) At standard studio temperature (68°F / 20°C), Jesmonite AC100 begins gelation within 12 to 15 minutes after mixing. In hot summer workshops (85°F / 30°C), pot life drops to 7 minutes. Pour promptly and tap mold sidewalls to release surface micro-bubbles.
Condition 5 2% Maximum Acrylic Pigment Saturation Limit Pure liquid Jesmonite pigments are highly concentrated. Adding more than 20 grams of pigment per 1,000 grams of total mix prevents the mineral powder from bonding with acrylic polymers, causing crumbling and delayed cure times in the jesmonite calculator.
Condition 6 Exothermic Peak & 30-Minute Demold Rule Jesmonite generates heat as it sets, reaching an exothermic peak between 20 and 30 minutes. Once the piece cools down from this warm peak, it can be safely demolded. However, full structural hardness is only achieved after 24 hours of evaporative drying.
Condition 7 Terrazzo Chip Volumetric Displacement When casting terrazzo items, pre-made crushed Jesmonite chips displace liquid slurry. If your design incorporates 30% terrazzo chips by weight, reduce the base slurry calculated in our jesmonite calculator accordingly to avoid severe mold overflow.

Standard Mold Volume Reference Table (AC100 Liquid & Powder)

When batch casting popular home decor silhouettes, match your measured water volumes against these calibrated outputs from our jesmonite calculator (including 5% mixing cup residue):

Cast Item Description Water Volume (ml) AC100 Liquid (g) Base Powder (g) Total Batch Slurry
Round Coaster (10cm × 1cm) ~80 ml 42 g 105 g 147 g
Oval Trinket Tray (18cm × 9.5cm) ~160 ml 84 g 210 g 294 g
Scallop / Shell Jewelry Dish ~120 ml 63 g 158 g 221 g
Hexagon Coaster (Single) ~95 ml 50 g 125 g 175 g
Ribbed Arch Plant Pot (Small) ~240 ml 126 g 315 g 441 g

Real-World Case Studies Tested in the Jesmonite Calculator

To examine casting batch efficiency, explore two practical studio projects calculated using our jesmonite calculator:

Case Study 1: Production Run of 4 Terrazzo Coasters (320 ml Total)

Project Details: Pouring four 10cm round coaster molds simultaneously. Each mold requires 80 ml of water volume (320 ml total). Testing these parameters in the jesmonite calculator gives:

Total Water Volume: 320 ml
Raw Slurry (×1.75): 560 grams
+5% Cup Residue: 588 grams total
AC100 Liquid (588 / 3.5): 168.0 grams
Base Powder (168 × 2.5): 420.0 grams
Ratio Check: Exact 2.5:1
Batch Allocation: 588g Total

Our jesmonite calculator ensures you pour all 4 coasters to their precise brim without falling 20 grams short on the final mold.

Case Study 2: Marbled Fluted Trinket Tray (160 ml Water Test)

Project Details: Handcrafting a single two-tone marbled oval trinket tray. Mold water weight is 160 grams. Running calculations through this jesmonite calculator:

Mold Volume: 160 ml
Net Mix (×1.75): 280 grams
+5% Preparation Buffer: 294 grams
AC100 Liquid: 84.0 grams
Base Powder: 210.0 grams
2% Pigment Cap: 5.8g maximum
Slurry Split: 84g Liq + 210g Base

The jesmonite calculator confirms dividing the slurry into two cups (200g white base + 94g terracotta tinted) preserves correct mineral hydration.

5 Pro Studio Strategies for Flawless Terrazzo & Marble Castings

Professional composite crafters use our jesmonite calculator to maintain high product quality and reduce material waste:

  • Always Pour Liquid First, Then Add Powder: Pouring powder into a beaker and dumping liquid on top traps dry powder pockets at the bottom of the container. Pouring the liquid first and sprinkling base powder while whisking ensures instant, lump-free blending as calculated in this jesmonite calculator.
  • High-Shear Mixing for 2 Full Minutes: Hand stirring with a popsicle stick leaves un-hydrated acrylic clumps. Attaching a mini high-shear mixing blade to a cordless drill shears the slurry smooth and releases incorporated air bubbles within 120 seconds.
  • Tap Silicone Molds Firmly Post-Pour: Air bubbles naturally migrate toward the mold surface. Tapping the table or vibrating the mold base for 45 seconds immediately after pouring forces micro-bubbles to float to the top rim, ensuring smooth, pinhole-free top surfaces.
  • Wet-Sand Under Running Water: When exposing terrazzo chips, always wet-sand using 120 to 400 grit waterproof sandpaper. Dry sanding produces fine mineral dust that is hazardous to inhale and scratches the cured acrylic finish.
  • Seal with Acrylic or Beeswax Sealers: Because cured Jesmonite AC100 is porous like fine ceramic, unsealed pieces absorb coffee, oil, and water stains. Applying a food-safe penetration sealer or natural beeswax paste protects trays and preserves vibrant pigment colors.

Frequently Asked Questions About Jesmonite AC100 Math

Why do you multiply water volume by 1.75 in the Jesmonite calculator?

Water has a specific density of 1.0 g/ml. Because Jesmonite slurry is a dense mineral composite containing gypsum and acrylic polymers, 1 ml of mixed Jesmonite weighs approximately 1.75 grams. Without this 1.75 multiplier in our jesmonite calculator, your cast will run out of material before reaching the top of the mold.

Can I change the 2.5:1 Jesmonite AC100 ratio?

No. The 2.5:1 weight ratio is chemically calibrated. Adding excess liquid makes cured pieces soft, chalky, and prone to breaking. Adding excess powder makes slurry too viscous to pour, trapping large air bubbles. Our jesmonite calculator preserves this exact manufacturer standard.

How long does Jesmonite take to cure before demolding?

Jesmonite AC100 reaches an exothermic heat peak within 20 to 30 minutes. Once the cast cools down to ambient room temperature (typically 30 to 45 minutes), it can be safely demolded. However, allow 24 hours of evaporative drying before sanding or sealing.

How much pigment can I safely add to Jesmonite?

You can add a maximum of 2% pigment by weight relative to the total batch. For example, in a 300g batch calculated in our jesmonite calculator, use no more than 6 grams of liquid pigment. Exceeding 2% weakens the cured crystal matrix.

What is the difference between Jesmonite AC100 and epoxy resin?

Jesmonite AC100 is a non-toxic, water-based mineral composite that cures opaque like fine stone in 30 minutes with zero VOC fumes. Epoxy resin is a petroleum-based plastic polymer that cures crystal-clear over 24 hours. Our jesmonite calculator models the unique mineral density of water-based composites.

How do I calculate terrazzo chips in this tool?

Pre-made terrazzo chips displace wet slurry in equal volume. If you plan to add 20% terrazzo chips to your mixture, calculate your total mold slurry in this jesmonite calculator and reduce the liquid and powder outputs by 20% before mixing.

Is Jesmonite waterproof and food safe?

Unsealed Jesmonite is water-resistant but naturally porous. It requires a dedicated penetration food-grade acrylic sealer to prevent liquid staining. It is suitable for decorative food contact (fruit bowls, dry crackers) but not recommended for microwave, dishwasher, or hot liquids.

Scroll to Top